Posted on

Cleaning Green – Care Tips for Your Base Metal Jewelry!

Over time base metal jewelry will tarnish. Kept in-check it can add character to your designs... but when it gets out of control there are easy (and green!) cleaning methods you can use to get the maximum enjoyment out of your design.
Over time base metal jewelry will tarnish. Kept in-check it can add character to your designs… but when it gets out of control there are easy (and green!) cleaning methods you can use to get the maximum enjoyment out of your design.

 

Butterfly Sundries’ etched jewelry is treated with a darkener before sealing (and shipping!) to add depth and contrast to the design, but over time other colors can appear on the jewelry. If you look closely in the picture above, you can see green tarnish is beginning to show up between the letters on this Butterfly Sundries’ Shakespearean Insult Cuff.

If things like this have kept you from ordering base metal jewelry, or if you’ve noticed this effect on some of your pieces, this post is for you! First off, don’t worry; tarnishing is a natural process. It can show up in a number of different colors, depending upon metal type, including black and green among others. This process can be reduced, delayed and corrected by following the care instructions listed below.

 

How to care for your etched designs from Butterfly Sundries…

Rule of Thumb:

Whenever you take off your copper or brass jewelry, wipe it down with a clean cloth; this will help to reduce the time that sweat and oils from your skin have access to the copper or brass (it will also prolong the benefits of the wax sealant applied before it was shipped to you).

Cleaning (Go Green!):

Put your copper or brass jewelry item into a bowl and pour in enough of one of the following to fully immerse your piece: lemon juice, white vinegar (you may want to add a little salt), tomato ketchup, or Worcestershire sauce. You can let it stay in the solution for up to 10-20 minutes (no longer!). If the jewelry is especially dirty you may want to change the liquid a couple of times. (If you intend to use a sealant like wax on your piece, put on gloves now!) Use an old toothbrush or soft cloth to “scrub” the design clean (If you use a toothbrush, be careful; the darkener I painted onto your design could be scrubbed off if you clean too deeply into the etched areas!). Run water over the jewelry to rinse. Now use soap and water to thoroughly clean and dry your piece with a clean soft cloth.

Polishing:

Feel free to use a polishing cloth on your etched designs from Butterfly Sundries! This is a good option if you want to keep a certain amount of tarnish in the etched areas for contrast (as I did for the picture above), but want to renew the brightness of the raised areas.

Sealing

After cleaning I recommend using a wax sealant to protect your design. (Important note if you intend to seal your item: once your item is cleaned, I highly recommend using gloves whenever touching your design until after you’ve applied a sealant! You don’t want to seal the oils from your fingertips onto the surface of your design. Trust me- I learned the hard way!) Good options are car wax or Renaissance Wax (what I use). After applying the wax, buff your jewelry with a soft cloth and it’s ready to be worn again!

One thought on “Cleaning Green – Care Tips for Your Base Metal Jewelry!

  1. Nice Care Tips for Base Metal Jewelry.

Leave a Reply

Your email address will not be published. Required fields are marked *

Please confirm you\'re human.... *